Factory wholesale P-Aminophenyl Acetic Acid - Tetrahydrofuran – Debon

Identification

English name:tetrahydrofuran 

Molecular formula:C4H8O

CAS number:109-99-9 

UN number: 3051

Dangerous goods number:42022 

RTECS number:LU5950000

IMDGRule coding:3144

Physical and chemical properties

Appearance and traits

A clear, low viscosity liquid with an ether-like odor.

Boiling point (°C)

65.4

Relative density (air = 1)

 2.5

Relative density (water = 1)

0.89

Solubility

Soluble in ethanol, ether, aliphatic hydrocarbons, aromatic hydrocarbons, chlorinated hydrocarbons, acetone, benzene and other organic solvents, but low water solubility

Toxicity anIdentificationh hazards

Exposure limit

 

China MAC:300mg/m3

United StatesTLVTN:

OSHA 200ppm,590mg/m3

Russia MAC:100mg/m3

United StatesTLVWN:

ACGIH 250ppm,737mg/m3

Route of invasion

Inhalation, ingestion, percutaneous absorption

toxicity

Low toxicity

Health hazard

With stimulation and anesthesia. Inhalation causes upper respiratory tract irritation, nausea, dizziness, headache, and central nervous system depression. Can cause liver and kidney damage. Liquid or high concentration of vapor is irritating to the eye. Long-term repeated contact with the skin may cause dermatitis due to defatting.

Burning explosion hazard

Flammability

combustible

Construction fire insurance classification: 

Flash point (°C):17.2

 

Auto-ignition temperature (°C)

321.1

Lower explosion limit (V%):2.3

Upper explosion limit (V%):11.8

 

Dangerous characteristics

Its vapor and air can form an explosive mixture. In case of high heat, open flame and strong oxidants, it is easy to cause burning. Exposure to air or in the presence of light can produce potentially explosive peroxides. It reacts with acids to react. It reacts violently with potassium hydroxide and sodium hydroxide. Its vapor is heavier than air and can spread to a relatively distant place at a lower place. It will ignite and ignite in case of fire.

 

Combustion decomposition product

Carbon monoxide, carbon dioxide,

stability

Unstable

 

Polymerization danger

Can’t appear

Incompatibility

Acids, bases, strong oxidants, oxygen

 

Fire fighting methods

Foam, carbon dioxide, dry powder, sand. Fire extinguishing with water is not effective.

Storage precautions

Usually the product is added with a polymerization inhibitor. Store in a cool, ventilated warehouse. Keep away from fire and heat. The temperature of the reservoir should not exceed 30 °C. The package is sealed and must not be in contact with air. It should be stored separately from oxidants, acids, alkalis, etc., and should not be mixed. Explosion-proof lighting and ventilation facilities are used. It is forbidden to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with leakage emergency treatment equipment and suitable containment materials.

Leakage disposal

Quickly evacuate personnel from the contaminated area to a safe area, and conduct isolation to strictly restrict access. Cut off the fire source. It is recommended that emergency personnel wear self-contained positive pressure breathing apparatus and wear anti-static overalls. Enter the scene from the upper wind. Cut off the source of the leak as much as possible. Prevent entry into restricted spaces such as sewers and flood drains. Small amount of leakage: Adsorption or absorption with sand or other non-combustible materials. It can also be rinsed with a large amount of water, diluted in water and placed in the wastewater system. A large number of leaks: building a dike or digging a pit. Cover with foam to reduce steam hazards. Spray water cools and dilutes the steam, protects the site personnel, and dilutes the spill into incombustibles. Transfer to a tank truck or special collector with an explosion-proof pump, recycle or transport to a waste disposal site for disposal.